HISTORY

Established GRAND HALO TECHNOLOGY CO., LTD. in Taiwan,researched and applied many patents for innovative LED product.

Purchased 15341M² of land for factory construction in Chang An, Dong Guan, China.

Started the first phase of factory construction, including three floors main building 5300M2 and four floors living quarter 2000M².

Completed the first phrase of factory construction and established DONG GUAN GRAND HALO ELECTRONIC CO., LTD. Meanwhile, purchased another 8671 M² land for factory expansion.

Installed power and water supply, introduced equipments to began machine testing and stuff training.

Dong Guan Factory has started mass production and goods delivery.

In order to deliver goods to worldwide, established GRAND HALO OPTO ELECTRONIC INTERNATIONAL (HK) LTD.

All the products were fully entered into mass production, actively planned and introduced new ISO9000 of 2000 version into Dong Guan factory.

Dong Guan factory had attained the international ISO9001 2000 version certificate. Completed the second phase of apartment building 5000M² of Dong Guan factory. Successfully signed Sales Representative Agreement with CANAAN (a Japanese company), entered into Japan Market.

Introduced and installed automatic equipment (2nd lot) at Dong Guan factory and doubled the productivity.

Became KOHA'S (a Japanese company) commission manufacturer to produce SMD LED.

Scheduled to build the clean room (around 335 M2 CLASS 5000) in Floor 3.

Successfully signed the Cooperation Agreement with NAGASE (a Japanese company).

Qualified the clean room and put it into production.

Successfully developed and went into mass production of photo relay and photo interrupter.

The technicians from Sanyo came into our factory and began the technology cooperation.

Appointed by Sumitomo (a Japanese company) to pilot run SeZn White SMD LED.

Established OEM center and started to run.

Successfully developed the ultra-thin and energy saving LED back light wrist watch module with SEIKO (a Japanese company).

Introduced and installed equipment from Nagase (a Japanese company).

Signed OEM Contract and Technology Cooperation Agreement on SMD Ambient light sensor with Microsemi (an America company).

The infra-red receiver module was formally put into mass production. Began the mass production with introduced equipment from Microsemi (an American company).

Introduced casting SMD LED (5168 series) into molding for mass production.

Developed LED lighting module and lighting luminaries to meet market demand.

Attained the ISO14001 international environmental system certificate.

Started long-term lighting test on successfully developed new era’s light LED low power package which applied multinational patent.

Signed Sales Representative Agreement on LED lighting luminaries with MBI HK Company.

Successfully developed the first LED waterproof tube light.

Start the outdoor lighting test of the first LED street light (Lamppost: 7M, 180 watt,central illumination: 20LUX).

Successfully developed energy saving tube light and LED tube light with power of 25 W. Start the outdoor lighting test of the second LED street light (Lamppost: 9M, 120 watt, centralillumination: 25Lux). The average attenuation of New era LED lighting Module is within 7% after a consecutive of 10,000 hours lighting test.

Aggressively invested into the research of LED product that is combined with solar, water power and wind power.

Developed MR16\GU10\E27\E14 series spot light and 4 feet LED tube light with the power less than 20 W.

Developed the PAR38 series light with high heat dissipation and more power saving.

Improved the LED street light with more than 100/lm per watt (power supply is not included).

Improved the LED street light with more than 110/lm per watt (power supply is not included),completed the Luminous Flux Lab.

Conducted the tube light test on Choi Hung Station and demonstration.

Completed the Exhibition Hall of Lighting Luminaries

Built mass production line for lighting luminaries. Finished the LED street lighting demonstration project at Bin jiang Road, Ning bo, Zhejiang.

Retrofitted all the lighting with LED lighting in GRAND HALO factory, contributed a saving power of more than 50%.

Successfully developed the second generation street light with the rate of IP 68. Completed the LED lighting project at the kitchen of Tin Shui Wai Restaurant of Maxim Group.

Successfully developed Bi-pin T8 tube light with simple connection and easy installation.

GRAND HALO engaged in drafting of LED street light Local standard (Guangdong Province).

Developed the energy saving blub 13W. B61 LED bulb is only 6.5W, saving half of energy.

Developed the LED Dimmer bulb 5W-10W. 8-series tunnel light is approved by Chongqing highway engineering testing center.

Complete the development of 7-serise street light , tunnel light and wall wash light.

Developed and completed 15W 4-foot tube light with 1300 lumin & efficacy of 87lm/w (including driver).

Complete Foshan Red Bull Factory Lighting Project and Soby Saloon Shinchu Taiwan.

Attained high & new tech enterprises certificate.

Complete Century Shopping Mall Lighting Project on Guiyang, Guizhou. Tunnel Light (P3-P7) Pass CNEx11.0503 National Anti Explosive Certificate.

Complete Dongshi business district street lights and landscape lighting project.

Complete CNPN gas station lighting project.

Finished the lighting project on SILICONWARE PRECISION INDUSTRIES CO., LTD. R&D building.

Taiwan Headquarter office moved to Zhongke road.

20 year anniversary celebration.

Completed new production line and incre

Attained IATF 16949 certificate.